oreotwitter.blogg.se - Netxms console default password

#Netxms console default password how to

You can try to reset the switch to factory default settings by holding the Factory Reset button on the switch for 10 seconds.

I still cannot find the IP address of my switch. Note: Ensure that your PC is connected to a port in the management VLAN.

Type the admin password of the switch (the default password is password) and click Login.

Type the IP address of the switch into the address bar of the web browser and press Enter.

When you have determined the IP address of the switch, the next step is to access the admin page:

#Netxms console default password how to

If you are unsure how to do this, see the How to set a static IP address

Note, in this case, you will need to record your computer's TCP/IP configuration settings, and then configure the computer with a static IP address of 192.168.0.210 and with 255.255.255.0 as the subnet mask. If the switch is not connected to a network, connected to a network with no DHCP server, or, connected directly to your PC, then the switch will use its default IP address, 192.168.0.239.You can find the MAC address of the switch on the label underneath the switch. If your internet router is also your DHCP server, you may find the list of assigned IP addresses on the admin page of your internet router (check for an "attached devices" page or similar). You need to look for the IP address that is assigned to the MAC address of the switch. If the switch is connected to a network with a DHCP server, check the list of assigned IP addresses on the DHCP server.If you cannot use the Smart Control Center, then use one of the following methods to determine the IP address of the switch: The simplest way to find the IP address of the switch is to discover it using the Smart Control Center To access the admin page of a Smart Switch, you first need to find the IP address of the switch.